FIXED HEIGHT
WORKSTATION

Containment Rating
BS7258: 0.1ppm
AHRAE 110: approved

The workstation design positions neatly between full external exhaust fume/dust cupboards and re-circulating filter units.
The workstation uses the same exhaust system as required with fume cupboards, but without the encumbrance of a glass sash superstructure.

This radical design maintains user inhalation protection at 0.1ppm (gas containment) whilst giving easier hand/eye co-ordination.
The freedom of movement reduces spillage.

The ventilated workstation directs the air stream across the work surface from front to back. This single direction 'Laminar' flow achieves maximum purge of the active area, leaving the work surface unrestricted and available for use.

Protex ventilated workstations capture emissions equal to the gas containment demands of:
British Standard : fume cupboards BS7258
USA Standard: ASHRAE 110

As the airflow challenge is directed across the work surface and not down through perforations in the worktop, the scavenge stream is unrestricted and maintains an even and predictable pattern.

Dimensions
Available in economic widths of – 1000 / 1200 / 1500 / 2000mm

Total powered adjustment provides the answer to user compatability with ducted protection.

Developed for USA clients includes powered variable height worktop to enable such extreme user functions from tall column to powder balance work.

The unit can be linked into an existing fume cupboard exhaust system and can be used to contain powders, droplet and gaseous emissions, using HEPA or carbon filtration linked into the total exhaust system.

From tall column to worktop height

	Large Set-up Workstation Containment Rating BS7258: 0.1ppm AHRAE 110: approved Extra width and depth work surface to set-up complex equipment within a safe environment

Air Flow Monitor Control

Air flow monitor control to display extract flow. Audio Visual Alarms.

Additional Facilities
The workstation can accept Carbon or HEPA filtration in the extract system if additional environmental protection is required.

Under bench Hazard storage: Ventilated
All ventilated workstations will accept our ventilated hazard storage.
The units have a fully welded steel body, twin skinned doors, locks,intumescent seals and internal tray.
The detail is compliant with petroleum storage requirements.